# Fall Arrest

> What fall arrest means, the parts of a personal fall arrest system, fall arrest vs fall restraint, OSHA limits and why every system needs a rescue plan.

- URL: https://essential.construction/academy/glossary/fall-arrest/
- Author: Kyle Parry (https://essential.construction/about-us/kyle-parry/, https://www.linkedin.com/in/kyleparry/) - Kyle Parry is the founder of Essential Construction. He has worked in construction for more than 20 years, leading projects across Canada for the country's largest contractors and developers.
- Publisher: Essential Construction (https://essential.construction/)
- Last updated: 2026-11-03

---

Fall arrest is the last line of defence in protecting workers against falls. A fall arrest system does not stop a worker from falling; it stops a fall that has already started, limits the force on the body, and holds the worker until they can be rescued. Fall arrest procedures include proper tie-off and anchoring positions as well as a rescue plan.

Because the worker still falls, fall arrest sits below eliminating the hazard, guardrails and fall restraint in the hierarchy of fall protection. Use it when those options are not practical.

## Components of a personal fall arrest system

- **Anchorage** - a rated anchor point, beam clamp, roof anchor or engineered lifeline the system is tied to.
- **Body support** - a full-body harness, which spreads the arrest force across the thighs, pelvis, chest and shoulders. Body belts are not allowed for fall arrest under OSHA.
- **Connectors** - a shock-absorbing [lanyard](https://essential.construction/academy/glossary/lanyard/), a self-retracting lifeline (SRL), or a rope grab on a vertical lifeline, with locking snap hooks or carabiners.
- **Rescue** - the equipment, trained people and plan to get a fallen worker down quickly.

## Fall arrest vs fall restraint vs fall prevention

| Approach | What it does | Example |
| --- | --- | --- |
| Fall prevention | Removes the chance of a fall without the worker doing anything | Guardrails, covers, working from the ground |
| Fall restraint | Physically stops the worker reaching the edge | Harness on a lanyard short enough that the worker cannot reach the edge |
| Fall arrest | Lets the fall happen, then stops it | Harness and SRL tied to an overhead anchor |

## Key rules

In US construction, OSHA requires fall protection at 6 ft and sets limits for personal fall arrest systems in 29 CFR 1926.502(d), including:

- Anchorages able to support 5,000 lb per worker attached, or designed with a safety factor of at least two under a qualified person.
- Maximum arresting force of 1,800 lb on a worker using a body harness.
- Free fall of no more than 6 ft, with no contact with any lower level.
- Deceleration distance of no more than 3.5 ft.

In Canada, requirements are set by each province and territory (or federally for federally regulated work), with equipment covered by the CSA Z259 series. In the UK, the Work at Height Regulations 2005 apply and personal fall arrest systems are covered by BS EN 363.

## Clearance and rescue tips

- Check fall clearance before you tie off: free fall, deceleration distance from the lanyard or SRL label, harness stretch, worker height and a safety margin must all fit above the next level down.
- Anchor overhead where possible to reduce free fall and swing fall.
- Inspect the harness and connectors before every use, and take any gear that has arrested a fall out of service.
- Have a written rescue plan before work starts. A worker hanging in a harness can suffer suspension trauma, so rescue has to be fast.

## Related terms

- [Lanyard](https://essential.construction/academy/glossary/lanyard/)
- [Swing Stage](https://essential.construction/academy/glossary/swing-stage/)
- [Scaffold](https://essential.construction/academy/glossary/scaffold/)

## Related templates and guides

- [The Basics of Fall Protection](https://essential.construction/academy/tutorials/basics-of-fall-protection/)
- [Fall Protection vs Fall Prevention](https://essential.construction/academy/tutorials/fall-protection-vs-fall-prevention/)
- [Fall Protection Health and Safety Policy](https://essential.construction/files/construction/safety/fall-protection-health-and-safety-policy/)
- [Construction Safety Meeting - Fall Protection](https://essential.construction/files/construction/safety/toolbox-talks/construction-safety-meeting-fall-protection/)
- [Fall Arrest Required - Construction Sign Template](https://essential.construction/files/construction/signage/fall-arrest-required-construction-sign-template/)

## Frequently asked questions

### What is the difference between fall arrest and fall restraint?

Fall restraint keeps the worker from reaching an edge, so no fall can happen. Fall arrest allows the fall to start and then stops it before the worker hits a lower level. Restraint is preferred where it is practical because the worker never falls and rescue is not needed.

### What is arresting force?

Arresting force is the peak force passed to the worker's body when a fall arrest system stops a fall. Shock-absorbing lanyards and SRLs keep it low. Under OSHA, a personal fall arrest system used with a body harness must limit the maximum arresting force on the worker to 1,800 lb.

### What are examples of fall arrest equipment?

Full-body harnesses, shock-absorbing lanyards, self-retracting lifelines, rope grabs on vertical lifelines, horizontal lifeline systems, roof and beam anchors, locking snap hooks and carabiners, safety nets, and rescue kits used to lower or raise a worker after a fall.

### At what height is fall arrest required?

It depends on where you work. US construction requires fall protection at 6 ft under OSHA. Many Canadian provinces use 3 m (about 10 ft), with lower thresholds in some situations. UK law has no minimum height. Fall arrest is one of the options for meeting these requirements.
