# Galvanize

> Galvanizing coats steel with zinc to stop rust. How hot-dip galvanizing works, types of zinc coatings, standards, and welding and touch-up tips for site.

- URL: https://essential.construction/academy/glossary/galvanize/
- Author: Kyle Parry (https://essential.construction/about-us/kyle-parry/, https://www.linkedin.com/in/kyleparry/) - Kyle Parry is the founder of Essential Construction. He has worked in construction for more than 20 years, leading projects across Canada for the country's largest contractors and developers.
- Publisher: Essential Construction (https://essential.construction/)
- Last updated: 2026-11-03

---

To **galvanize** steel or iron is to coat it with zinc so it resists rust. In construction the term usually means **hot-dip galvanizing**: cleaned steel is dipped in a bath of molten zinc, which bonds to the surface and forms a tough coating. Galvanized steel is used outdoors and in damp areas, where bare or painted steel would corrode faster.

## How galvanizing protects steel

Zinc protects steel in two ways. First, it acts as a **barrier**, keeping moisture and oxygen off the steel. Second, it gives **sacrificial (cathodic) protection**: zinc is more reactive than steel, so where the coating is scratched or cut, the surrounding zinc corrodes first and protects the exposed steel.

In hot-dip galvanizing the zinc reacts with the steel to form zinc-iron alloy layers with a layer of pure zinc on top. The coating is bonded to the steel rather than simply sitting on it, which makes it harder to chip than paint.

## Types of zinc coatings

| Method | How it is applied | Typical uses |
| --- | --- | --- |
| Hot-dip galvanizing (batch) | Fabricated pieces dipped in molten zinc after fabrication | Structural steel, lintels, railings, stairs, embeds |
| Pre-galvanized (continuous) | Sheet or coil passed through molten zinc at the mill | Metal deck, steel studs, ductwork, flashing |
| Electrogalvanizing (zinc plating) | Thin zinc layer applied electrically | Small fasteners and hardware for dry interiors |
| Zinc-rich paint ("cold galvanizing") | Brushed or sprayed paint high in zinc dust | Touch-up and repair of damaged galvanizing |

## Galvanized steel in construction

Common standards in North America include ASTM A123 (fabricated steel products), ASTM A153 (hardware and fasteners), ASTM A653 (sheet steel) and ASTM A780 (repair of damaged coatings). ISO 1461 is widely used elsewhere. The specification sets the standard and coating requirements for each item.

Galvanizing should be planned at the design and shop drawing stage. Hollow sections such as [HSS](https://essential.construction/academy/glossary/hollow-steel-section/) need vent and drain holes so molten zinc can flow in and out and trapped air or moisture does not cause dangerous pressure in the kettle. Thin plates can distort from the heat.

## Site tips

- **Welding:** welding galvanized steel releases zinc oxide fumes. Remove the coating at the weld area where practical, use extraction or ventilation and suitable respiratory protection. See the [welding and cutting toolbox talk](https://essential.construction/files/construction/safety/toolbox-talks/toolbox-talk-welding-and-cutting/).
- **Repairs:** touch up field welds, cuts and damage with an approved zinc-rich paint or other repair method allowed by the specification.
- **Painting over galvanizing** (a duplex system) needs the right surface prep and a [primer](https://essential.construction/academy/glossary/primer/) made for galvanized surfaces, or the paint may peel.
- **Dissimilar metals:** keep galvanized steel from direct contact with copper and some treated lumber, or use separators and compatible fasteners.
- **Stud welding:** heavy galvanizing on deck can affect shear stud welds; see [Nelson studs](https://essential.construction/academy/glossary/nelson-studs/).

## Related terms

- [Hollow steel section (HSS)](https://essential.construction/academy/glossary/hollow-steel-section/)
- [C-channel](https://essential.construction/academy/glossary/c-channel/)
- [Bent plate](https://essential.construction/academy/glossary/bent-plate/)
- [Weld](https://essential.construction/academy/glossary/weld/)

## Related templates and guides

- [Guide to the design and construction of structural steel](https://essential.construction/academy/tutorials/the-ultimate-guide-to-the-design-and-construction-of-structural-steel/)
- [Design Guide 23: constructability of structural steel buildings](https://essential.construction/files/information/guides/design-guide-23-constructability-of-structural-steel-buildings/)
- [Corrosion mitigation for concrete structures](https://essential.construction/files/information/white-papers/corrosion-mitigation-for-concrete-structures/)

## Frequently asked questions

### What does galvanized mean?

Galvanized means steel or iron has been coated with zinc to protect it from rust. The zinc acts as a barrier and also corrodes first, protecting the steel underneath even where the coating is scratched. In construction it usually means hot-dip galvanized.

### How long does hot-dip galvanizing last?

It depends mainly on coating thickness and the environment. Dry interiors and rural air are mild; coastal, industrial and wet or buried conditions use zinc up faster. Galvanizers publish service-life charts by environment, and the specification should set the coating for the exposure.

### Can you weld galvanized steel?

Yes, but welding burns off the zinc and creates zinc oxide fumes that can cause metal fume fever. Remove the coating at the weld area where practical, use good ventilation or extraction and the right respiratory protection, then repair the coating afterward with an approved zinc-rich product.

### Is cold galvanizing the same as hot-dip galvanizing?

No. Cold galvanizing is a zinc-rich paint brushed or sprayed on. It is useful for touch-ups and repairs but gives a thinner coating with no metallurgical bond, so it is not equivalent to hot-dip galvanizing for a full new coating.
