{"id":11515,"date":"2020-01-26T03:42:10","date_gmt":"2020-01-26T03:42:10","guid":{"rendered":"https:\/\/essential.construction\/cnstrctr\/glossary\/weld\/"},"modified":"2026-11-03T10:07:25","modified_gmt":"2026-11-03T17:07:25","slug":"weld","status":"publish","type":"glossary","link":"https:\/\/essential.construction\/academy\/glossary\/weld\/","title":{"rendered":"Weld"},"content":{"rendered":"<p>A weld is a joint made by melting the edges of two metal parts, usually with added filler metal, so they fuse into one piece as they cool. To weld is to make that joint. On construction sites most welding is electric arc welding of steel; gas torches are used mainly for cutting and heating.<\/p>\n<h2>How welding works<\/h2>\n<p>An electric arc between an electrode and the steel creates enough heat to melt the base metal and the filler. Flux or shielding gas protects the molten pool from the air, which would otherwise cause porosity and weak welds. As the pool cools it solidifies into a continuous joint.<\/p>\n<h2>Common welding processes<\/h2>\n<table>\n<thead>\n<tr>\n<th>Process<\/th>\n<th>Also called<\/th>\n<th>Typical construction use<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Shielded metal arc welding (SMAW)<\/td>\n<td>Stick<\/td>\n<td>Field welding, repairs, miscellaneous metals<\/td>\n<\/tr>\n<tr>\n<td>Gas metal arc welding (GMAW)<\/td>\n<td>MIG \/ MAG<\/td>\n<td>Shop fabrication, light gauge and misc. steel<\/td>\n<\/tr>\n<tr>\n<td>Flux-cored arc welding (FCAW)<\/td>\n<td>Flux core<\/td>\n<td>Structural steel in the shop and field<\/td>\n<\/tr>\n<tr>\n<td>Gas tungsten arc welding (GTAW)<\/td>\n<td>TIG<\/td>\n<td>Stainless steel, aluminium, piping, fine work<\/td>\n<\/tr>\n<tr>\n<td>Submerged arc welding (SAW)<\/td>\n<td>Sub arc<\/td>\n<td>Long, heavy shop welds such as plate girders<\/td>\n<\/tr>\n<tr>\n<td>Arc stud welding<\/td>\n<td>Stud welding<\/td>\n<td>Shear studs and anchors on beams and embeds<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Types of welds on drawings<\/h2>\n<ul>\n<li><strong>Fillet weld<\/strong> &#8211; a triangular weld in the corner between two pieces; the most common structural weld.<\/li>\n<li><strong>Groove weld<\/strong> &#8211; placed in a prepared gap between parts, either complete joint penetration (CJP) or partial joint penetration (PJP).<\/li>\n<li><strong>Plug and slot welds<\/strong> &#8211; fill a hole or slot in one plate to join it to another.<\/li>\n<\/ul>\n<p>Welding symbols on shop drawings (AWS A2.4 in the US) show the weld type, size, length and location, and a flag on the symbol marks a field weld.<\/p>\n<h2>Codes and inspection<\/h2>\n<p>Structural steel welding in the US is usually done to AWS D1.1, with AWS D1.3 for sheet steel. In Canada, CSA W59 applies and fabricators are certified by the CWB to CSA W47.1. In Europe and the UK, execution of steel structures follows EN 1090. Inspection starts with visual checks, and the engineer may specify magnetic particle, dye penetrant, ultrasonic or radiographic testing for critical welds.<\/p>\n<h2>Site tips<\/h2>\n<ul>\n<li>Get a hot work permit, set up a fire watch and protect glass and finishes from spatter.<\/li>\n<li>Grind off paint or <a href=\"https:\/\/essential.construction\/academy\/glossary\/galvanize\/\">galvanizing<\/a> at the weld, ventilate the fumes, and touch up with <a href=\"https:\/\/essential.construction\/academy\/glossary\/primer\/\">primer<\/a> or zinc-rich paint afterward.<\/li>\n<li>Keep welder qualifications and welding procedure specifications (WPS) on site, and follow preheat requirements in cold weather.<\/li>\n<\/ul>\n<h2>Related terms<\/h2>\n<ul>\n<li><a href=\"https:\/\/essential.construction\/academy\/glossary\/nelson-studs\/\">Nelson Studs<\/a><\/li>\n<li><a href=\"https:\/\/essential.construction\/academy\/glossary\/hollow-steel-section\/\">Hollow Steel Section (HSS)<\/a><\/li>\n<li><a href=\"https:\/\/essential.construction\/academy\/glossary\/bent-plate\/\">Bent Plate<\/a><\/li>\n<li><a href=\"https:\/\/essential.construction\/academy\/glossary\/c-channel\/\">C-Channel<\/a><\/li>\n<\/ul>\n<h2>Related templates and guides<\/h2>\n<ul>\n<li><a href=\"https:\/\/essential.construction\/files\/construction\/safety\/toolbox-talks\/toolbox-talk-welding-and-cutting\/\">Toolbox Talk &#8211; Welding and Cutting<\/a><\/li>\n<li><a href=\"https:\/\/essential.construction\/files\/information\/guides\/design-guide-21-welded-connections-a-primer-for-engineers\/\">Design Guide 21 &#8211; Welded Connections<\/a><\/li>\n<li><a href=\"https:\/\/essential.construction\/academy\/tutorials\/the-ultimate-guide-to-the-design-and-construction-of-structural-steel\/\">The Ultimate Guide to Structural Steel Design and Construction<\/a><\/li>\n<\/ul>\n<h2>Frequently asked questions<\/h2>\n<h3>What are the four main types of welding?<\/h3>\n<p>The four arc processes most people mean are stick (SMAW), MIG\/MAG (GMAW), flux-cored (FCAW) and TIG (GTAW). Stick and flux-cored handle wind and field conditions well, MIG is fast in the shop, and TIG gives precise, clean welds on thin or non-ferrous metals.<\/p>\n<h3>What is the difference between a fillet weld and a groove weld?<\/h3>\n<p>A fillet weld sits in the corner where two parts meet and needs little preparation. A groove weld fills a prepared gap or bevel between the parts and can go fully through the joint thickness. Groove welds take more preparation and inspection, so engineers use fillet welds where they can.<\/p>\n<h3>What is the difference between a shop weld and a field weld?<\/h3>\n<p>Shop welds are made in the fabricator&#8217;s plant under controlled conditions and are usually cheaper and easier to inspect. Field welds are made on site during erection and are marked with a flag on the welding symbol. Designers try to keep field welds to a minimum.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>A weld is a joint made by melting the edges of two metal parts, usually with added filler metal, so they fuse into one piece<\/p>\n","protected":false},"author":1,"featured_media":1647,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"glossary-categories":[468],"glossary-tags":[],"class_list":["post-11515","glossary","type-glossary","status-publish","has-post-thumbnail","hentry","glossary-categories-division-05-metals"],"_links":{"self":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary\/11515","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary"}],"about":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/types\/glossary"}],"author":[{"embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/comments?post=11515"}],"version-history":[{"count":1,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary\/11515\/revisions"}],"predecessor-version":[{"id":20348,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary\/11515\/revisions\/20348"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/media\/1647"}],"wp:attachment":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/media?parent=11515"}],"wp:term":[{"taxonomy":"glossary-categories","embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary-categories?post=11515"},{"taxonomy":"glossary-tags","embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary-tags?post=11515"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}