{"id":11526,"date":"2020-01-26T03:42:11","date_gmt":"2020-01-26T03:42:11","guid":{"rendered":"https:\/\/essential.construction\/cnstrctr\/glossary\/mag-lock\/"},"modified":"2026-11-03T10:07:51","modified_gmt":"2026-11-03T17:07:51","slug":"mag-lock","status":"publish","type":"glossary","link":"https:\/\/essential.construction\/academy\/glossary\/mag-lock\/","title":{"rendered":"Mag Lock"},"content":{"rendered":"<p>A <strong>mag lock<\/strong> (magnetic lock or electromagnetic lock) is a piece of door hardware that holds a door closed using an electromagnet. The magnet is usually mounted on the head of the door frame and a steel armature plate on the door. When the magnet is energized it holds the plate, and the door stays shut; when power is cut, the door opens freely.<\/p>\n<p>Mag locks are typically installed where a door needs security but the path of emergency egress cannot be blocked. Common examples are access-controlled entrances, stairwell doors, and secure areas in hospitals, schools and offices. In the event of a fire alarm the mag lock is released so the door can open freely.<\/p>\n<h2>How a mag lock works<\/h2>\n<p>A coil inside the lock body becomes a strong electromagnet when low-voltage DC power is applied. The armature plate on the door sticks to it, and the lock&#8217;s holding force resists the door being pulled open. There is no latch or bolt. Because the lock only holds while powered, mag locks are <strong>fail-safe<\/strong>: power loss unlocks the door.<\/p>\n<p>The lock is wired into the access control system, which releases it when a valid card or code is presented, or when a request-to-exit device is triggered.<\/p>\n<h2>Types of mag locks<\/h2>\n<table>\n<thead>\n<tr>\n<th>Type<\/th>\n<th>Description<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Surface-mounted<\/td>\n<td>Lock body on the face of the frame head; most common and easiest to retrofit<\/td>\n<\/tr>\n<tr>\n<td>Shear lock<\/td>\n<td>Concealed in the frame and door top for a cleaner look<\/td>\n<\/tr>\n<tr>\n<td>Double door<\/td>\n<td>One housing with two magnets for a pair of doors<\/td>\n<\/tr>\n<tr>\n<td>Delayed egress<\/td>\n<td>Holds for a short code-set delay with an alarm before releasing, where permitted<\/td>\n<\/tr>\n<tr>\n<td>Gate lock<\/td>\n<td>Weatherproof model for exterior gates<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Mag lock vs electric strike<\/h2>\n<p>An <strong>electric strike<\/strong> replaces the strike plate in the frame and works with a normal latching lockset. People can always leave by turning the lever, and strikes can be fail-safe or fail-secure. A mag lock gives a strong hold with no moving latch, but egress depends on the lock being released electrically, so the code requirements are stricter.<\/p>\n<h2>Code and egress requirements<\/h2>\n<p>Building and fire codes such as the IBC and NFPA 101 in the US, and the National Building Code in Canada, allow electromagnetic locks on egress doors only under specific conditions. These typically include release by a motion sensor or switches in the door hardware on the egress side, and automatic release on loss of power; sensor-release systems also need a manual &#8220;push to exit&#8221; device that cuts power and automatic release on fire alarm activation. The exact rules vary by code edition and jurisdiction, so confirm with the authority having jurisdiction.<\/p>\n<h2>Installation and coordination tips<\/h2>\n<ul>\n<li>Show mag locks in the door hardware schedule and coordinate with the security and fire alarm contractors.<\/li>\n<li>Confirm the frame head has blocking or reinforcement for the lock and the door can take the armature fixings.<\/li>\n<li>Align the armature carefully; poor alignment reduces holding force.<\/li>\n<li>Test fire alarm release, power-loss release and exit devices before occupancy and record the results.<\/li>\n<\/ul>\n<h2>Related templates and guides<\/h2>\n<ul>\n<li><a href=\"https:\/\/essential.construction\/files\/construction\/quality\/qaqc-checklist-door-installation\/\">QA\/QC checklist: door installation<\/a><\/li>\n<li><a href=\"https:\/\/essential.construction\/files\/construction\/quality\/qaqc-checklist-door-frame-installation\/\">QA\/QC checklist: door frame installation<\/a><\/li>\n<li><a href=\"https:\/\/essential.construction\/academy\/tutorials\/introduction-to-mechanical-and-electrical-systems\/\">Introduction to mechanical and electrical systems<\/a><\/li>\n<\/ul>\n<h2>Frequently asked questions<\/h2>\n<h3>Do mag locks unlock when the power goes out?<\/h3>\n<p>Yes. A mag lock only holds while it is powered, so it releases when power is cut. That fail-safe behaviour is why it suits egress doors. Where the door must stay locked during an outage, a fail-secure electric strike or electrified lockset is used instead, if the code allows it.<\/p>\n<h3>What is the difference between a mag lock and an electric strike?<\/h3>\n<p>A mag lock holds the door shut with an electromagnet and needs no latch. An electric strike replaces the strike plate in the frame and works with a normal latching lockset, releasing the latch electrically. Strikes allow free mechanical egress through the lever and can be fail-safe or fail-secure.<\/p>\n<h3>Are mag locks allowed on exit doors?<\/h3>\n<p>Often, but with conditions. Codes typically require release by a sensor or the door hardware on the egress side and automatic release on power loss; sensor-release systems also need a manual release device and automatic release on fire alarm. Requirements differ by code edition and jurisdiction, so confirm with the authority having jurisdiction before installing.<\/p>\n<h3>How strong is a mag lock?<\/h3>\n<p>Mag locks are rated by holding force. Ratings around 600 lb and 1,200 lb are common for single doors, with lighter models for cabinets and gates. Real-world security also depends on door alignment, the armature mounting and the frame.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>A mag lock (magnetic lock or electromagnetic lock) is a piece of door hardware that holds a door closed using an electromagnet. The magnet is<\/p>\n","protected":false},"author":1,"featured_media":1660,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"glossary-categories":[472],"glossary-tags":[],"class_list":["post-11526","glossary","type-glossary","status-publish","has-post-thumbnail","hentry","glossary-categories-division-08-doors-and-windows"],"_links":{"self":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary\/11526","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary"}],"about":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/types\/glossary"}],"author":[{"embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/comments?post=11526"}],"version-history":[{"count":1,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary\/11526\/revisions"}],"predecessor-version":[{"id":20357,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary\/11526\/revisions\/20357"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/media\/1660"}],"wp:attachment":[{"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/media?parent=11526"}],"wp:term":[{"taxonomy":"glossary-categories","embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary-categories?post=11526"},{"taxonomy":"glossary-tags","embeddable":true,"href":"https:\/\/essential.construction\/academy\/wp-json\/wp\/v2\/glossary-tags?post=11526"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}