# Telehandler Daily Inspection Checklist

> Telehandler daily inspection checklist covering mast and lift, engine temperature, tyres, suspension and starting. Editable – $4.99, or free with a trial.

- URL: https://essential.construction/files/construction/safety/inspections/telehandler-daily-inspection-checklist/
- Publisher: Essential Construction (https://essential.construction/)
- Last updated: 2026-11-02
- Price: $4.99 USD (also included with Essential Construction membership)
- Categories: Inspections
- Division: 01 - General
- File Type: Spreadsheet

---

This Telehandler daily inspection checklist template makes your Telehandler checklists safer and more reliable.

This telehandler daily inspection checklist helps operators check the machine before each shift and catch faults before they cause a breakdown or an incident. Downtime from equipment failure can hold up a whole jobsite, and a quick, consistent pre-use check is the simplest way to prevent it.

## What is a telehandler inspection checklist?

A telehandler inspection checklist is a pre-use form an operator completes before starting work with a telescopic handler. It walks through the boom, forks or attachment, hydraulics, engine, tires, controls and safety devices, and records whether each item is OK or needs attention. The completed sheet shows the machine was checked, flags defects for repair and gives a record of who inspected it and when. Most sites require the check at the start of every shift.

## When to use it

- At the start of every shift, before the telehandler is used
- When a machine arrives on site from a rental company or another project
- When a new operator takes over the machine
- After a repair, to confirm the fault has been fixed
- During site audits, as evidence that daily checks are being done

## What's included

This checklist is a spreadsheet (.xlsx) built around the problems that most often take a telehandler out of service, including:

- Mast or lift (boom) problems
- Engine overheating
- Worn-out tires and suspension
- Starting issues

Add any extra checks your rental company, manufacturer or site rules require.

## How to fill it out

1. Fill in the date, machine details and operator name.
2. Walk around the machine with the engine off and check for leaks, damage and loose parts.
3. Check fluid levels, tires and the boom and forks or attachment.
4. Start the engine and test controls, brakes, horn, lights and alarms.
5. Mark each item as OK or defective, and note details of any defect.
6. Report defects to your supervisor and do not use the machine until they are fixed.
7. Sign the sheet and keep it with the machine or in the site file.

## Tips

- Keep the manufacturer's manual and load chart in the cab and check the chart matches the attachment fitted.
- Do not sign off a check you did not do. A rushed check gives a false record.
- Keep completed sheets together so repeat faults are easy to spot.
- Tag out a defective machine so nobody else uses it by mistake.

## Related templates and guides

- [Excavator Daily Inspection Checklist](https://essential.construction/files/construction/safety/inspections/excavator-daily-inspection-checklist/)
- [Skid Steer Daily Inspection Checklist](https://essential.construction/files/construction/safety/inspections/skid-steer-daily-inspection-checklist/)
- [Tools and Equipment Inspection Log](https://essential.construction/files/construction/logistics/tools-and-equipment-inspection-log/)
- [Caution Forklifts – Construction Sign Template](https://essential.construction/files/construction/signage/caution-forklifts-construction-sign-template/)
- [All inspection templates](https://essential.construction/files/construction/safety/inspections/)

## Frequently asked questions

### How often should a telehandler be inspected?

Operators should carry out a pre-use inspection at the start of every shift. In the US, OSHA treats telehandlers as rough-terrain forklifts, and its powered industrial truck rules require them to be examined before being placed in service, at least daily. Periodic servicing and examinations follow the manufacturer's schedule and local rules.

### What should a telehandler daily inspection cover?

A typical check covers fluid levels and leaks, tires and wheels, the boom, forks or attachment, hydraulic hoses, the engine, brakes and steering, controls, lights, horn and alarms, seat belt, and the load chart. Any defect should be recorded and reported before the machine is used.

### Is a daily check the same as an annual inspection?

No. The daily check is a quick pre-use inspection by the operator. Periodic or annual inspections are more detailed examinations carried out by a qualified person. In the UK, for example, telehandlers also need periodic thorough examination under lifting equipment rules, which is separate from daily checks.

### Who should complete the telehandler checklist?

The trained operator who will use the machine that shift should complete and sign it. Supervisors should review completed checklists and make sure reported defects are fixed before the machine goes back into use.

### What happens if a defect is found?

Record the defect on the checklist, tell your supervisor and take the machine out of service if the fault affects safe operation. Tag it so nobody else uses it, and only return it to work once the repair is done and checked.
