# Movement Joints In Tile Assemblies

> There has been considerable discussion concerning the need for movement joints in tile assemblies. The question is not whether they are needed; that is a simple yes. The questions are “Where do they go?”, and…

- URL: https://essential.construction/files/information/white-papers/movement-joints-in-tile-assemblies/
- Publisher: Essential Construction (https://essential.construction/)
- Last updated: 2021-05-28
- Price: Free download
- Categories: White Papers
- Division: 09 - Finishes
- File Type: PDF

---

There has been considerable discussion concerning the need for movement
 joints in tile assemblies. The question is not whether they are needed;
 that is a simple yes. The questions are “Where do they go?”, and “What
 is used to fill the joint in the tile assembly that will control or compensate
 for movement in the entire assembly?” There are several different types of
 construction movement joints defined by the Tile Council of North America
 (TCNA) that are needed in tile assemblies:
 • Construction / Cold Joints are formed between two successive placements
 of concrete. Quite often the reinforcement in the concrete will continue
 through the two successive placements.
 • Contraction / Control Joints formed in the concrete or sawn into the cured
 concrete. This creates a weakened plane in the concrete that regulates
 the location of cracking from natural movement during the curing cycle.
 The concrete will crack the same as the random cracks we commonly
 observe in concrete slabs, except with the inclusion of control joints, this
 random cracking is controlled to a specific location. There is a potential for
 continued movement that will cause these cracks to open and close the
 same as the unrestricted natural cracks that occur randomly.
 • Expansion Joints are created in the concrete to compensate for excessive
 expansion, due primarily to temperature changes in the concrete. As the
 concrete cures it generally will shrink and as the temperature raises the
 concrete and tile assembly will expand. When the expansion exceeds the
 shrinkage the concrete needs a joint to compensate; if not it can bend and
 dome slightly, resulting in cracks in the assembly
