![\"Sarah](\"https:\/\/www.on-sitemag.com\/wp-content\/uploads\/2025\/09\/Sarah-Bobbitt-Brock-Leclerc-Jason-Hurdis-scaled.jpeg\")
<\/a><\/p>\nFrom left: Sarah Bobbitt, senior marketing consultant at Caterpillar, Western North American champion Brock Leclerc of Quattro Constructors in B.C., and Jason Hurdis, senior manager global industry at Caterpillar. (Photo by Justin Kase Conder, courtesy of Caterpillar)<\/p>\n<\/div>\n
The best machine operators across North America gathered on the Caterpillar grounds at the Edward J. Rapp Customer & Training Center in Clayton, N.C., to prove their mastery of both equipment and technology, and when the dust settled on the semifinals of the Global Operator Challenge (GOC), Maine\u2019s Brian Hayden and British Columbia\u2019s Brock Leclerc were the last two standing.<\/p>\n
This round of the GOC divided the 32 best operators from the United States and Canada into east and west regions for the semifinal competitions. Hayden, of Hayden Excavating and Welding Inc., and representing dealer Milton Cat, was crowned North America\u2019s Eastern Region semifinal champion. He finished the four GOC events with the lowest point total of 1,313, which is a combination of time and penalties.<\/p>\n
\u201cWhat makes me proud is just, you know, nothing to do with me,\u201d he commented. \u201cIt\u2019s bringing recognition to the operators that devote their time and lives to what they do and then showcasing them with their skills.\u201d<\/p>\n
Leclerc, who works at Quattro Constructors in B.C., represented dealer Finning Canada. He completed the same four challenge events with 1,540 points to emerge as the Western Region semifinal champion for North America.<\/p>\n
\u201cIt\u2019s beyond exciting what we\u2019ve accomplished here as a group,\u201d he stated. \u201cEverybody working with great sportsmanship\u2026 it\u2019s been an unreal, awesome day and amazing experience.\u201d<\/p>\n
The two winners from North America will now advance to the final round, which will be held inside Caterpillar\u2019s 70,000-square-foot outdoor exhibit in the Festival Lot during CONEXPO-CON\/AGG in Las Vegas, Nev., on March 4.<\/p>\n
For the semifinals competitions, all competitors completed the same four challenge events using Cat equipment and technology.<\/p>\n
\u201cOur team pulled out all the stops to make sure this was a true test of skill,\u201d said Jason Hurdis, global industry solutions manager for Caterpillar. \u201cWe created a level playing field where every operator had the same shot at victory, proving that it all came down to talent, grit and performance.\u201d<\/p>\n
The Over-the-Top Challenge saw competitors put their versatility and precision to the test by operating a Cat compact track loader through a dynamic, multi-phase course. Starting with a bar carriage, operators navigated rugged terrain, including C-Channels and moguls, before swapping to a bucket for a high-speed loading sequence. After dumping two loads into a commercial truck, they switched to a material handling arm to lift and place objects on a staged platform. The challenge ended with a final sprint to the finish, demanding skill, speed and seamless equipment transitions.<\/p>\n
An urban-inspired challenge, City Streets showcased the operators\u2019 finesse and power as they tackled a series of precision tasks using a Cat excavator. Competitors began by placing a manhole lid into a cast frame, then maneuvered to the berm\u2019s edge to retrieve and insert a 30-inch pipe into a vertical culvert. The challenge intensified with a heavy-load sequence, requiring operators to fill an articulated truck with 15 to 20 tons of material. After honking the truck off, participants returned to the start and parked the bucket in its designated spot, completing a course that demanded accuracy, control and strength.<\/p>\n
Featuring a Cat wheel loader, the Load \u2018N Loader Challenge highlighted the agility and adaptability of the operators as they navigated a dual-phase course. Starting at the bunker pile, participants loaded and hauled material along a marked path before dumping it into a Cat articulated truck. The challenge then shifted to precision handling, where operators had to swap their bucket for forks and transport a pipe across a designated route and place it accurately on a flatbed trailer. After reversing the process and restoring the pipe to its original location, competitors reconnected the bucket and raced to the finish. It was a test of speed, control and seamless equipment transitions.<\/p>\n
To celebrate a century of earthmoving excellence, the Centennial Push Challenge had operators put a Cat dozer through a series of precision maneuvers. Competitors began by dozing a tire down a narrow path into a goal zone, then sliding a pipe along a rope using only the dozer\u2019s blade. The course continued with a grading segment that demanded smooth, even dirt distribution, followed by a bell-ringing task that tested blade accuracy. Operators then reversed off a slope and returned to the starting box, finishing with a ripper placement that sealed the run. The challenge was a tribute to skill, control and the legacy of the dozer.<\/p>\n
The regional GOC semifinals are a culmination of months of competitions held worldwide by Cat dealers.<\/p>\n
\u201cThis year we saw a record-breaking number of dealer competitions,\u201d said Hurdis. \u201cIt\u2019s a true testament to the passion and pride of the operators in this industry.\u201d<\/p>\n
Regional competitions continue in Europe, South America and Asia Pacific in October to determine the nine operators who will compete in the global finals. The winner of the global finals will receive either a $10,000 cash prize or an equal value trip for two to a Caterpillar location of their choice.<\/p>\n
For more information about the Global Operator Challenge visit www.cat.com\/operatorchallenge<\/a>.<\/p>\n