Bent Plate
A bent plate is a flat steel plate that has been bent on a press brake into an angle or channel shape to form a
A bent plate is a flat steel plate that has been bent on a press brake into an angle or channel shape to form a
Camber is a curve in the vertical plane of a structural steel member, while sweep is a curve in the horizontal plane. All mill-produced steel
A joist is a length of timber or steel supporting part of the structure of a building, typically arranged in parallel series to support a
Nelson studs are headed steel shear studs (also called shear connectors or headed stud anchors) welded to the top flange of a steel beam, usually
A C-channel is a structural steel section shaped like the letter C, with a flat back (web) and two flanges on one side. Because one
A weld is a joint made by melting the edges of two metal parts, usually with added filler metal, so they fuse into one piece
To galvanize steel or iron is to coat it with zinc so it resists rust. In construction the term usually means hot-dip galvanizing: cleaned steel
A hollow structural section (HSS) is a steel tube with a square, rectangular or round cross-section that is hollow on the inside. HSS members are