Primer

A primer is the first coat applied to a surface before paint or another finish. Its job is to help the finish stick, seal porous ...
Kyle Parry
Kyle Parry
interior primer paint - Primer « Back to Glossary Index

A primer is the first coat applied to a surface before paint or another finish. Its job is to help the finish stick, seal porous surfaces so they absorb evenly, block stains from bleeding through, and, on metal, help resist corrosion. Primer is a base for the finish coats, not usually the final coat itself.

Some finish paints are sold as “paint and primer in one”. These work on many repaint jobs but do not replace a dedicated primer on every surface.

What primer does

  • Adhesion: gives the finish coat something to grip, especially on glossy or slick surfaces.
  • Sealing: evens out absorption on new drywall, plaster, masonry and bare wood so the finish dries with uniform sheen.
  • Stain blocking: stops water stains, smoke, marker and wood tannins from showing through.
  • Corrosion protection: rust-inhibitive and zinc-rich primers protect bare steel.
  • Hiding: a tinted primer helps when making a big colour change.

Types of primer

Surface Typical primer Notes
New drywall Latex (acrylic or PVA) drywall primer Evens out paper and joint compound
Bare wood Oil/alkyd, shellac or stain-blocking acrylic Some woods bleed tannins through latex
Masonry, concrete, stucco Alkali-resistant masonry primer Fresh masonry may need to cure first
Bare steel Rust-inhibitive or zinc-rich primer Usually part of a specified coating system
Galvanized steel, aluminium Primer rated for non-ferrous metals Surface prep matters; see galvanize
Glossy or slick surfaces Bonding primer Often paired with light sanding

Primer vs sealer vs undercoat

A sealer mainly controls absorption on porous surfaces; many products are sold as primer-sealers. In the UK, undercoat is a separate coat applied over the primer to build thickness and hide before the topcoat, mostly in traditional oil-based systems. In North America the primer usually goes straight under the finish coats.

Site tips

  • Prepare the surface first: clean, dry, sound, and sanded or abraded where the data sheet says so.
  • Check that primer and finish are compatible. Mixing systems from different manufacturers can cause adhesion failure.
  • Respect recoat times and temperature limits, especially outdoors or in unheated buildings.
  • Inspect drywall after priming. Defects in joints and corners show up much more clearly once primed.
  • On structural steel, touch up the shop primer at field welds and damaged areas before finishes or intumescent paint go on.

Related terms

Related templates and guides

Frequently asked questions

Do you always need primer before painting?

Not always. A sound, clean, previously painted surface in a similar colour and type of paint often needs no primer. Bare drywall, new plaster, bare wood, bare metal, stains, glossy surfaces and big colour changes usually do. Follow the paint manufacturer’s data sheet and the project specification.

What is the difference between primer and paint?

Primer is made to stick to the substrate and give the finish coat a uniform, well-bonded base. Finish paint is made for colour, sheen, washability and weather resistance. Primer is usually not durable enough to be left as the final coat.

Is paint and primer in one as good as a separate primer?

Self-priming paints work well over sound painted surfaces and some bare drywall. They are not a replacement for specialty primers on bare metal, heavy stains, glossy finishes or tannin-rich wood. Check the product data sheet for which substrates it is rated for.

What is a shop primer on structural steel?

A shop primer is a coat applied in the fabrication shop to protect steel during shipping and erection. It is not always a full corrosion system. Field welds and damaged areas are usually touched up on site, and the specification may call for further coats.

Ask AI about this page: ChatGPT, Claude or PerplexityCopy as Markdown

Merriam-Webster Online Dictionary
primer (noun)
1.
a small book for teaching children to read
2.
a small introductory book on a subject
3.
a short informative piece of writing
primer (noun)
1.
a device for - priming , especially a cap, tube, or wafer containing percussion powder or compound used to ignite an explosive charge
2.
material used in priming a surface - called also prime coat
3.
a molecule (as a short strand of RNA or DNA) whose presence is required for formation of another molecule (as a longer chain of DNA)
« Back to Glossary Index